Is alkaline exchange membrane fuel cell performance limited by anode flooding or cathode dry-out?
J Liu, F Wei, M Secanell
Chemical Engineering Journal, 176749, 2026
Publications
0
760
380
190
570
| All | Since 2021 | |
|---|---|---|
| Citations | 6567 | 3742 |
| h-index | 46 | 36 |
| i10-index | 95 | 81 |
2026
Characterization of carbon derived from ferrocene-catalyzed methane decomposition in a floating catalyst tubular reactor
A Naseri, P Saini, E Abbasi-Atibeh, J Shen, M Secanell, N Semagina, ...
Carbon Trends, 100608, 2026
Cited by 12025
Using Edge-Type Reference Electrodes to Estimate Anode and Cathode Overpotentials in Alkaline Exchange Membrane Fuel Cells and Electrolysers
J Liu, J Mouallem, M Secanell, A Quintero
Electrochemical Society Meeting Abstracts 248, 2077-2077, 2025
Contact and Performance of Low Anode Loading CCMs for PEM Water Electrolysis at Different Clamping Pressures
O Weiland, L Stein, L Padilla, P Trinke, B Bensmann, M Secanell, ...
Electrochemical Society Meeting Abstracts 248, 2137-2137, 2025
Determination of anode and cathode overpotentials in AEMFCs using multiple edge-type reference electrodes: Experiments and simulations
J Liu, J Mouallem, M Ghadban, M Secanell
International Journal of Hydrogen Energy 184, 151887, 2025
Cited by 4Analysis of thermal and composition distributions inside a methane thermal decomposition reactor using experiments and simulation
A Mohammadtabar, A Punia, V Kale, E Abbasi-Atibeh, A Naseri, ...
International Journal of Hydrogen Energy 177, 151585, 2025
Materials engineering for high performance and durability proton exchange membrane water electrolyzers
PA García-Salaberri, L van Eijk, W Bangay, KJ Ferner, MH Ha, M Moore, ...
ACS Applied Energy Materials 8 (18), 13050-13121, 2025
Cited by 9Development of an Open-Source Microscale Lithium-Ion Battery Model
M Ghadban, M Secanell
Electrochemical Society Meeting Abstracts 247, 148-148, 2025
Characterization of particles generated by non-catalytic methane pyrolysis in a tubular flow reactor
A Naseri, E Abbasi-Atibeh, M Kiasadegh, J Shen, M Secanell, ...
Aerosol Science and Technology 59 (2), 163-184, 2025
Cited by 7Exploring the impact of ionomer content and distribution on inkjet printed cathodes for anion exchange membrane fuel cells
J Liu, M Secanell
Electrochimica Acta 509, 145293, 2025
Cited by 62024
Structured porous 17-PH stainless steel layer fabrication through laser powder bed fusion
S Sardarian, S Dehgahi, F Wei, M Secanell, AJ Qureshi
International Journal of Sustainable Engineering 17 (1), 306-321, 2024
Cited by 6A reduced methane pyrolysis mechanism for above-atmospheric pressure conditions
A Punia, L Kostiuk, J Olfert, M Secanell
Chemical Engineering Journal 502, 157994, 2024
Cited by 4Exploring the Impact of Cathode Ionomer Content on Alkaline Exchange Membrane Fuel Cells (AEMFCs) Using Inkjet Printing Technique
J Liu, M Secanell
Electrochemical Society Meeting Abstracts prime2024, 3019-3019, 2024
Experimental and numerical analysis of alkaline exchange membrane water electrolyzers
J Eitzen, J Mouallem, S Storbakken, A Quintero, M Secanell
Electrochemical Society Meeting Abstracts prime2024, 3168-3168, 2024
Cited by 1Bifunctional Oxygen Electrodes for PEM-Unitized Regenerative Fuel Cell Fabricated By Inkjet Printing
L Padilla, J Liu, N Semagina, M Secanell
Electrochemical Society Meeting Abstracts prime2024, 3030-3030, 2024
Inkjet printed multilayer bifunctional electrodes for proton exchange membrane unitized regenerative fuel cells
L Padilla, J Liu, N Semagina, M Secanell
Chemical Engineering Journal 499, 156258, 2024
Cited by 7A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation
Z Gao, JT Lang, F Wei, B Iskandarani, Y Qi, M Secanell, J Su, L Guo, ...
Journal of Power Sources 606, 234507, 2024
Cited by 11Unveiling the role of PTFE surface coverage on controlling gas diffusion layer water content
F Wiesner, J Woodford, M Sabharwal, M Hesselmann, S Jung, ...
ACS Applied Materials & Interfaces 16 (27), 34947-34961, 2024
Cited by 14Characterization and Pore Scale Modeling of Microporous Layer/Catalyst Layer Interfaces for PEMFCs
W Mengli, L Zhu, K Duan, M Chen, C Liu, M Secanell, R Zhang, PC Sui
245th ECS Meeting (May 26-30, 2024), 2024
2023
Fuel-Cell Performance and Stability during Liquid-Water Removal Cycles
A Kosakian, F Wei, J Zhou, S Jung, J Sharman, M Secanell
Electrochemical Society Meeting Abstracts 244, 1719-1719, 2023
(Invited) Challenges and Opportunities for the Computational Analysis of Electrochemical Energy Systems
M Secanell
Electrochemical Society Meeting Abstracts 244, 1700-1700, 2023
Impact of liquid-water accumulation and drainage cycles on fuel-cell performance and stability
A Kosakian, F Wei, J Zhou, S Jung, J Sharman, M Secanell
Electrochimica Acta 469, 143221, 2023
Cited by 14Strong Metal-Support Interactions in ZrO2-Supported IrOx Catalyst for Efficient Oxygen Evolution Reaction
H Dhawan, X Tan, J Shen, J Woodford, M Secanell, N Semagina
ChemCatChem 16 (1), e202300668, 2023
Cited by 6Augmented Lagrangian approach for multi-objective topology optimization of energy storage flywheels with local stress constraints: V. Kale et al.
V Kale, N Aage, M Secanell
Structural and Multidisciplinary Optimization 66 (11), 231, 2023
Cited by 10Low loading inkjet printed bifunctional electrodes for proton exchange membrane unitized regenerative fuel cells
LP Urbina, J Liu, N Semagina, M Secanell
Journal of Power Sources 580, 233448, 2023
Cited by 20Effect of operating conditions and micro-porous layer on the water transport and accumulation in proton exchange membrane fuel cells
F Wei, A Kosakian, M Secanell
Chemical Engineering Journal 471, 144423, 2023
Cited by 17Analysis of methane pyrolysis experiments at high pressure using available reactor models
A Punia, J Tatum, L Kostiuk, J Olfert, M Secanell
Chemical Engineering Journal 471, 144183, 2023
Cited by 17Good practices and limitations of the hydrogen pump technique for catalyst layer protonic conductivity estimation
M Moore, M Mandal, A Kosakian, M Secanell
ACS Applied Materials & Interfaces 15 (31), 37312-37326, 2023
Cited by 26 Membrane-electrode-assembly modeling using OpenFCST
A Kosakian, M Secanell
PEM Fuel Cells: Characterization and Modeling, 173, 2023
Cited by 2Stress constrained topology optimization of energy storage flywheels using a specific energy formulation
V Kale, N Aage, M Secanell
Journal of Energy Storage 61, 106733, 2023
Cited by 12Dataset of methane pyrolysis products in a batch reactor as a function of time at high temperatures and pressures
J Tatum, A Punia, L Kostiuk, M Secanell, J Olfert
Data in Brief 47, 108953, 2023
Cited by 9Numerical study of the impact of two-phase flow in the anode catalyst layer on the performance of proton exchange membrane water electrolysers
M Moore, M Mandal, A Kosakian, M Secanell
Journal of The Electrochemical Society 170 (4), 044503, 2023
Cited by 283D microscale modeling of NMC cathodes using multi-resolution FIB-SEM tomography
M Ghadban, M Sabharwal, C Rea, X Li, AE Goode, M Smith, C Murphy, ...
Journal of Power Sources 562, 232745, 2023
Cited by 22Insights on designing non-PGM catalyst layers at low humidity
Y Kim, LP Urbina, T Asset, M Secanell, P Atanassov, J Barralet, JT Gostick
Journal of Power Sources 562, 232741, 2023
Cited by 5Water transport in anion and proton exchange membranes
F Wei, A Kosakian, J Liu, J Kracher, R Khan, M Secanell
Journal of Power Sources 557, 232494, 2023
Cited by 18A hybrid cooling tower model for plume abatement and performance analysis
A Zargar, A Kodkani, B Vickers, MR Flynn, M Secanell
Applied Thermal Engineering 219, 119593, 2023
Cited by 31Thermal management of electrochemical energy devices or systems
Z Qu, P Ming, K Jiao, M Secanell, X Li
Frontiers in Thermal Engineering 2, 1121606, 2023
Cited by 12022
Water Transport Characterization of Anion and Proton Exchange Membranes
M Secanell, A Kosakian, J Liu, F Wei
242nd ECS Meeting (October 9-13, 2022), 2022
Impact of Different Supports on the Performance of Ir Oxide Based Catalysts Synthesized Using Incipient Wetness Method
H Dhawan, J Woodford, N Semagina, M Secanell
Electrochemical Society Meeting Abstracts 242, 2598-2598, 2022
Cited by 1(Digital Presentation) Three-Dimensional Pore-Scale Modelling of NMC Cathodes Using Multi-Resolution FIB-SEM Images
M Ghadban, M Sabharwal, X Li, AE Goode, M Smith, C Murphy, ...
Electrochemical Society Meeting Abstracts 242, 126-126, 2022
Water Transport Characterization of Anion and Proton Exchange Membranes
F Wei, A Kosakian, J Liu, M Secanell
Electrochemical Society Meeting Abstracts 242, 2620-2620, 2022
Understanding the effect of porosity and pore size distribution on low loading catalyst layers
M Sabharwal, M Secanell
Electrochimica Acta 419, 140410, 2022
Cited by 53Improved polymer electrolyte membrane water electrolyzer performance by using carbon black as a pore former in the anode catalyst layer
M Mandal, M Secanell
Journal of Power Sources 541 (1 September 2022), 231629, 2022
Cited by 48A three-dimensional numerical model for the motion of liquid drops by the particle finite element method
E Mahrous, R Valéry Roy, A Jarauta, M Secanell
Physics of Fluids 34 (5), 2022
Cited by 8Numerical analysis of a counter-flow wet cooling tower and its plume
A Zargar, A Kodkani, A Peris, E Clare, J Cook, P Karupothula, B Vickers, ...
International Journal of Thermofluids 14, 100139, 2022
Cited by 36Porous electrode components in polymer electrolyte fuel cells and electrolyzers
M Secanell, J Gostick, PA Garcia-Salaberri
Elsevier, 2022
Cited by 122021
How does porosity heterogeneity affect the transport properties of multibore filtration membranes?
D Wypysek, D Rall, T Neef, A Jarauta, M Secanell, M Wessling
Journal of Membrane Science 636, 119520, 2021
Cited by 9On determining the optimal shape, speed, and size of metal flywheel rotors with maximum kinetic energy
V Kale, M Thomas, M Secanell
Structural and Multidisciplinary Optimization 64 (3), 1481-1499, 2021
Cited by 27Tri-Planar geometric dimensioning and tolerancing characteristics of SS 316L laser powder bed fusion process test artifacts and effect of base plate removal
BS Rupal, T Singh, T Wolfe, M Secanell, AJ Qureshi
Materials 14 (13), 3575, 2021
Cited by 6Estimation of relative transport properties in porous transport layers using pore-scale and pore-network simulations
S Jung, M Sabharwal, A Jarauta, F Wei, M Gingras, J Gostick, M Secanell
Journal of The Electrochemical Society 168 (6), 064501, 2021
Cited by 42Fabrication of platinum group metal-free catalyst layer with enhanced mass transport characteristics via an electrospraying technique
Y Kim, T Asset, F Wei, P Atanassov, M Secanell, J Barralet, JT Gostick
Materials Today Energy 20, 100641, 2021
Cited by 18A Numerical Study on the Impact of Low Electronic Conductivity on PEMWE Electrolyser Performance
M Moore, M Mandal, M Secanell
Electrochemical Society Meeting Abstracts 239, 1192-1192, 2021
(Invited) Multi-Scale Analysis of Transport in Dry and Partially-Saturated Porous Media
M Secanell, S Jung, A Jarauta-Arabi, F Wei, M Sabharwal, J Gostick
Electrochemical Society Meeting Abstracts 239, 961-961, 2021
State-of-the-art iridium-based catalysts for acidic water electrolysis: A minireview of wet-chemistry synthesis methods: Preparation routes for active and durable iridium catalysts
H Dhawan, M Secanell, N Semagina
Johnson Matthey Technology Review 65 (2), 247-262, 2021
Cited by 19A numerical study on the impact of cathode catalyst layer loading on the open circuit voltage in a proton exchange membrane fuel cell
M Moore, S Shukla, S Voss, K Karan, A Weber, I Zenyuk, M Secanell
Journal of The Electrochemical Society 168 (4), 044519, 2021
Cited by 26A two-dimensional numerical model for the sliding motion of liquid drops by the particle finite element method
E Mahrous, RV Roy, A Jarauta, M Secanell
Physics of Fluids 33 (3), 2021
Cited by 17Estimating charge-transport properties of fuel-cell and electrolyzer catalyst layers via electrochemical impedance spectroscopy
A Kosakian, M Secanell
Electrochimica Acta 367, 137521, 2021
Cited by 602020
Measurement of the protonic and electronic conductivities of PEM water electrolyzer electrodes
M Mandal, M Moore, M Secanell
ACS applied materials & interfaces 12 (44), 49549-49562, 2020
Cited by 93A Compressible Fluid Flow Model Coupling Channel and Porous Media Flows and Its Application to Fuel Cell Materials
A Jarauta, V Zingan, P Minev, M Secanell
Transport in Porous Media 134 (2), 351-386, 2020
Cited by 22Geometric tolerance and manufacturing assemblability estimation of metal additive manufacturing (AM) processes
BS Rupal, N Anwer, M Secanell, AJ Qureshi
Materials & Design 194, 108842, 2020
Cited by 90Improving the Energy Capacity and Cost Effectiveness of Flywheel Rotors in Grid-Scale Energy Storage Systems by Varying Their Shape, Speed and Size
V Kale, M Secanell
ASME Power Conference 83747, V001T10A005, 2020
Understanding single-phase water-management signatures in fuel-cell impedance spectra: A numerical study
A Kosakian, LP Urbina, A Heaman, M Secanell
Electrochimica Acta 350, 136204, 2020
Cited by 73A particle finite element-based model for droplet spreading analysis
E Mahrous, A Jarauta, T Chan, P Ryzhakov, AZ Weber, RV Roy, ...
Physics of Fluids 32 (4), 2020
Cited by 14The influence of graphitization on the thermal conductivity of catalyst layers and temperature gradients in proton exchange membrane fuel cells
R Bock, H Karoliussen, BG Pollet, M Secanell, F Seland, D Stanier, ...
International Journal of Hydrogen Energy 45 (2), 1335-1342, 2020
Cited by 21Geometric tolerance characterization of laser powder bed fusion processes based on skin model shapes
BS Rupal, N Anwer, M Secanell, AJ Qureshi
Procedia CIRP 92, 169-174, 2020
Cited by 142019
Measurement of Ionic Conductivity of PEM Water Electrolyzer Electrodes
M Mandal, M Moore, M Secanell
Electrochemical Society Transactions 236 92 (8), 757-766, 2019
Cited by 3An electrochemical model of an amperometric NOx sensor
M Aliramezani, CR Koch, M Secanell, RE Hayes, R Patrick
Sensors and Actuators B: Chemical 290, 302-311, 2019
Cited by 45Geometric benchmark test artifact for laser powder bed fusion process: Design and preliminary results
BS Rupal, M Secanell, AJ Qureshi
Proceedings of the 2nd Conference of NSERC Network for Holistic Innovation …, 2019
Cited by 7Decoupling structure-sensitive deactivation mechanisms of Ir/IrOx electrocatalysts toward oxygen evolution reaction
X Tan, J Shen, N Semagina, M Secanell
Journal of Catalysis 371, 57-70, 2019
Cited by 138PEM Fuel Cells: Modeling
M Secanell, A Jarauta, A Kosakian, M Sabharwal, J Zhou
Lipman, T., Weber, A. (eds) Fuel Cells and Hydrogen Production. Encyclopedia …, 2019
Cited by 26Determination of PEFC gas diffusion layer and catalyst layer porosity utilizing Archimedes principle
S Shukla, F Wei, M Mandal, J Zhou, MS Saha, J Stumper, M Secanell
Journal of The Electrochemical Society 166 (15), F1142-F1147, 2019
Cited by 39Computational analysis of gas transport in fuel cell catalyst layer under dry and partially saturated conditions
M Sabharwal, LM Pant, N Patel, M Secanell
Journal of The Electrochemical Society 166 (7), F3065-F3080, 2019
Cited by 502018
An implicit surface tension model for the analysis of droplet dynamics
A Jarauta, P Ryzhakov, J Pons-Prats, M Secanell
Journal of Computational Physics 374, 1196-1218, 2018
Cited by 312018 Fuel Cells Gordon Research Conference and Gordon Research Seminar
DJ Jones, K Karan, M Secanell, SD Knights, T Muzaffar, J Lack
A new implicit finite element model for the analysis of droplet dynamics
A Jarauta, P Ryzhakov, J Pons-Prats, M Secanell
Bulletin of the American Physical Society 63, 2018
A comparative study between optimal metal and composite rotors for flywheel energy storage systems
V Kale, M Secanell
Energy Reports 4, 576-585, 2018
Cited by 84Microstructural analysis of electrode performance in fuel cells at varying water contents
M Sabharwal, M Secanell
Electrochemical Society Transactions aimes2018 86 (13), 51-67, 2018
Cited by 4An open-source multiscale transient model for numerical characterization of proton exchange membrane fuel cells
A Kosakian, L Padilla Urbina, A Heaman, M Secanell
Electrochemical Society Meeting Abstracts aimes2018, 1353-1353, 2018
Cited by 1N-Containing Carbon Nanospheres As PEFC Catalyst Support Prepared from Nature Inspired Precursor
MN Islam, V Ozhukil Kollath, FD Mayer, L Baron, M Secanell, K Karan
Electrochemical Society Meeting Abstracts aimes2018, 1520-1520, 2018
Analysis of the role of the microporous layer in improving polymer electrolyte fuel cell performance
J Zhou, S Shukla, A Putz, M Secanell
Electrochimica Acta 268, 366-382, 2018
Cited by 160Analysis of inkjet printed catalyst coated membranes for polymer electrolyte electrolyzers
M Mandal, A Valls, N Gangnus, M Secanell
Journal of The Electrochemical Society 165 (7), F543-F552, 2018
Cited by 56Virtual liquid water intrusion in fuel cell gas diffusion media
M Sabharwal, JT Gostick, M Secanell
Journal of The Electrochemical Society 165 (7), F553-F563, 2018
Cited by 47Correlation of changes in electrochemical and structural parameters due to voltage cycling induced degradation in PEM fuel cells
A Kneer, J Jankovic, D Susac, A Putz, N Wagner, M Sabharwal, ...
Journal of The Electrochemical Society 165 (6), F3241-F3250, 2018
Cited by 1232017
Design of Low-Cost FlyWheel Energy Storage Systems.
G Ertz, T Hrynik, D Lafleur, P Mertiny, M Secanell, N Wagner
SAMPE Journal 53 (6), 2017
Cited by 4Experimental and numerical analysis of a methane thermal decomposition reactor
D Paxman, S Trottier, MR Flynn, L Kostiuk, M Secanell
International Journal of Hydrogen Energy 42 (40), 25166-25184, 2017
Cited by 46Analysis of inkjet printed polymer electrolyte electrolyzer electrodes
M Mandal, A Valls, N Gangnus, M Secanell
Electrochemical Society Transactions 232 80 (8), 1085-1095, 2017
Cited by 1Characterization of inkjet printed electrodes with improved porosity
S Shukla, D Stanier, MS Saha, B Zahiri, M Tam, J Stumper, M Secanell
Electrochemical Society Transactions 231 77 (11), 1453-1463, 2017
Cited by 11On the application of the PFEM to droplet dynamics modeling in fuel cells
PB Ryzhakov, A Jarauta, M Secanell, J Pons-Prats
Computational Particle Mechanics 4 (3), 285-295, 2017
Cited by 27A Mixed Wettability Pore Size Distribution Based Mathematical Model for Analyzing Two-Phase Flow in Porous Electrodes: II. Model Validation and Analysis of Micro-Structural …
J Zhou, D Stanier, A Putz, M Secanell
Journal of The Electrochemical Society 164 (6), F540-F556, 2017
Cited by 44Improving FIB-SEM Reconstructions by Using Epoxy Resin Embedding
M Sabharwal, AMV Putz, D Susac, J Jankovic, M Secanell
ECS Transactions 77 (11), 1337-1349, 2017
Cited by 8Experimental and theoretical analysis of ink dispersion stability for polymer electrolyte fuel cell applications
S Shukla, S Bhattacharjee, AZ Weber, M Secanell
Journal of The Electrochemical Society 164 (6), F600-F609, 2017
Cited by 165A mixed wettability pore size distribution based mathematical model for analyzing two-phase flow in porous electrodes: i. mathematical model
J Zhou, A Putz, M Secanell
Journal of The Electrochemical Society 164 (6), F530-F539, 2017
Cited by 882016
A techno-economic assessment of large scale wind-hydrogen production with energy storage in Western Canada
B Olateju, A Kumar, M Secanell
International Journal of Hydrogen Energy 41 (21), 8755-8776, 2016
Cited by 212A Systematic Approach to Develop and Validate Models for the Design of Membrane Electrode Assemblies
AMV Putz, M Secanell
Electrochemical Society Meeting Abstracts 229, 1339-1339, 2016
Analysis of inkjet printed PEFC electrodes with varying platinum loading
S Shukla, D Stanier, MS Saha, J Stumper, M Secanell
Journal of The Electrochemical Society 163 (7), F677-F687, 2016
Cited by 126Precision and accuracy of suggested maxillary and mandibular landmarks with cone-beam computed tomography for regional superimpositions: An in vitro study
G Lemieux, JP Carey, C Flores-Mir, M Secanell, A Hart, MO Lagravère
American Journal of Orthodontics and Dentofacial Orthopedics 149 (1), 67-75, 2016
Cited by 18Analysis of catalyst layer microstructures: from imaging to performance
M Sabharwal, LM Pant, A Putz, D Susac, J Jankovic, M Secanell
Fuel Cells 16 (6), 734-753, 2016
Cited by 132Electrochemical reduction of dissolved oxygen in alkaline, solid polymer electrolyte films
D Novitski, A Kosakian, T Weissbach, M Secanell, S Holdcroft
Journal of the American Chemical Society 138 (47), 15465-15472, 2016
Cited by 40Local Mass Transport Resistance of Low-Loaded PEM Fuel-Cell Catalyst-Layers
ATS Freiberg, T Schuler, MC Tucker, M Secanell, AZ Weber
Electrochemical Society Meeting Abstracts 230, 3962-3962, 2016
Numerical study of droplet dynamics in a polymer electrolyte fuel cell gas channel using an embedded Eulerian-Lagrangian approach
A Jarauta, P Ryzhakov, M Secanell, PR Waghmare, J Pons-Prats
Journal of Power Sources 323, 201-212, 2016
Cited by 35Analysis of a flywheel energy storage system for light rail transit
A Rupp, H Baier, P Mertiny, M Secanell
Energy 107, 625-638, 2016
Cited by 1212015
Multi scale characterization of coal structure for mass transport
LM Pant, H Huang, M Secanell, S Larter, SK Mitra
Fuel 159, 315-323, 2015
Cited by 82Analysis of kinetic parameters and effect of Pt loading on cell performance of PEFC electrodes prepared by inkjet printing
S Shukla, K Domican, M Secanell
Electrochemical Society Transactions 228 69 (17), 761-772, 2015
Cited by 10Stochastic reconstruction and transport simulation of PEFC catalyst layers
LM Pant, M Sabharwal, S Mitra, M Secanell
Electrochemical Society Transactions 228 69 (17), 105-120, 2015
Cited by 6(Invited) Mathematical Modelling and Experimental Analysis of Thin, Low-Loading Fuel Cell Electrodes
M Secanell, A Putz, S Shukla, P Wardlaw, M Bhaiya, LM Pant, ...
ECS Transactions 69 (17), 157-187, 2015
Cited by 21*Experimental study of mass transport in PEMFCs: Through plane permeability and molecular diffusivity in GDLs
P Mangal, LM Pant, N Carrigy, M Dumontier, V Zingan, S Mitra, ...
Electrochimica acta 167, 160-171, 2015
Cited by 107A semi-analytical model for droplet dynamics on the GDL surface of a PEFC electrode
A Jarauta, M Secanell, J Pons-Prats, P Ryzhakov, SR Idelsohn, E Onate
international journal of hydrogen energy 40 (15), 5375-5383, 2015
Cited by 24Analysis of low platinum loading thin polymer electrolyte fuel cell electrodes prepared by inkjet printing
S Shukla, K Domican, K Karan, S Bhattacharjee, M Secanell
Electrochimica Acta 156, 289-300, 2015
Cited by 179Multigrid hierarchical simulated annealing method for reconstructing heterogeneous media
LM Pant, SK Mitra, M Secanell
Cited by 502014
Comparison of in vivo 3D cone-beam computed tomography tooth volume measurement protocols
D Forst, S Nijjar, C Flores-Mir, J Carey, M Secanell, M Lagravere
Progress in orthodontics 15 (1), 69, 2014
Cited by 59Three-dimensional cephalometric superimposition of the nasomaxillary complex
G Lemieux, JP Carey, C Flores-Mir, M Secanell, A Hart, N Dietrich, ...
American Journal of Orthodontics and Dentofacial Orthopedics 146 (6), 758-764, 2014
Cited by 15Analysis of non-isothermal effects on polymer electrolyte fuel cell electrode assemblies
M Bhaiya, A Putz, M Secanell
Electrochimica Acta 147, 294-309, 2014
Cited by 67Effect of electrode patterning on PEM fuel cell performance using ink-jet printing method
S Shukla, K Domican, M Secanell
Electrochemical Society Transactions 226 64 (3), 341-352, 2014
Cited by 28A Comprehensive Single-Phase, Non-Isothermal Mathematical MEA Model and Analysis of Non-Isothermal Effects
M Bhaiya, A Putz, M Secanell
Electrochemical Society Transactions 226 64 (3), 567-579, 2014
Cited by 1Measurements of permeability and effective in-plane gas diffusivity of gas diffusion media under compression
P Mangal, M Dumontier, N Carrigy, M Secanell
Electrochemical Society Transactions 226 64 (3), 487-499, 2014
Cited by 9Openfcst: An open-source mathematical modelling software for polymer electrolyte fuel cells
M Secanell, A Putz, P Wardlaw, V Zingan, M Bhaiya, M Moore, J Zhou, ...
Electrochemical Society Transactions 226 64 (3), 655-680, 2014
Cited by 59Stochastic reconstruction using multiple correlation functions with different-phase-neighbor-based pixel selection
LM Pant, SK Mitra, M Secanell
Physical Review E 90 (2), 023306, 2014
Cited by 89Initial Experimental and Theoretical Investigation of Solar Molten Media Methane Cracking for Hydrogen Production
D Paxman, S Trottier, M Nikoob, M Secanell, G Ordorica-Garcia
Energy Procedia 49, 2027–2036, 2014
Cited by 81A critical review of modeling transport phenomena in polymer-electrolyte fuel cells
AZ Weber, RL Borup, RM Darling, PK Das, TJ Dursch, W Gu, D Harvey, ...
Journal of The Electrochemical Society 161 (12), F1254-F1299, 2014
Cited by 723Understanding the effect of kinetic and mass transport processes in cathode agglomerates
M Moore, P Wardlaw, P Dobson, JJ Boisvert, A Putz, RJ Spiteri, ...
Journal of the Electrochemical Society 161 (8), E3125-E3137, 2014
Cited by 922013
Rationalizing catalyst inks for PEMFC electrodes based on colloidal interactions
S Shukla, S Bhattacharjee, M Secanell
Electrochemical Society Transactions 224 58 (1), 1409-1428, 2013
Cited by 23Multiobjective optimization framework for landmark measurement error correction in three-dimensional cephalometric tomography
A DeCesare, M Secanell, MO Lagravère, J Carey
Dentomaxillofacial Radiology 42 (7), 20130035, 2013
Cited by 21A generalized mathematical model to study gas transport in PEMFC porous media
LM Pant, SK Mitra, M Secanell
International Journal of Heat and Mass Transfer 58 (1-2), 70-79, 2013
Cited by 71Multi-Objective Optimization Framework for Landmark Measurement Error Correction in Three Dimensional Cephalometric Tomography
MO Lagravère, JP Carey, A DeCesare, M Secanell
Investigation of the ORR using the double-trap intrinsic kinetic model
M Moore, A Putz, M Secanell
Journal of the Electrochemical Society 160 (6), F670-F681, 2013
Cited by 77Knudsen diffusivity and permeability of PEMFC microporous coated gas diffusion layers for different polytetrafluoroethylene loadings
NB Carrigy, LM Pant, S Mitra, M Secanell
Journal of The Electrochemical Society 160 (2), F81-F89, 2013
Cited by 752012
Enclosure/Open Cathode Fuel Cell Mathematical Model for Analyzing System Performance Under Arctic Conditions
SM Miller, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2012
Analysis of Two-Phase Transport in Ultra-Thin Catalyst Layer Based Electrodes Using a Mixed Wettability MPL Model
P Mateo-Villanueva, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2012
Cited by 1Effect of Ionomer Loading in Inket Printed Catalyst Coated Membranes on PEFC Performance
S Shukla, K Taufertshofer, S Bhattacharjee, M Secanell, E Halliop, ...
International Conference on Fuel Cell Science, Engineering and Technology …, 2012
Cited by 6Characterization of Transport Properties in Porous Media of a PEM Fuel Cell
LM Pant, SK Mitra, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2012
Cited by 1Development of a cathode electrode model using the ORR dual-trap intrinsic kinetic model
M Moore, A Putz, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2012
Cited by 3Absolute permeability and Knudsen diffusivity measurements in PEMFC gas diffusion layers and micro porous layers
LM Pant, SK Mitra, M Secanell
Journal of Power Sources 206, 153-160, 2012
Cited by 193Characterization of the PEM fuel cell catalyst layer microstructure by nonlinear least-squares parameter estimation
P Dobson, C Lei, T Navessin, M Secanell
Journal of the Electrochemical Society 159 (5), B514-B523, 2012
Cited by 982011
Modified multi-component gas transport formulation with phoretic effects
LM Pant, M Secanell, SK Mitra
Microfluidics and nanofluidics 11 (6), 725-742, 2011
Cited by 2Erratum to “Optimization analysis for plane orientation in 3-dimensional cephalometric analysis of serial cone-beam computerized tomography images”[Oral Surg Oral Med Oral …
MO Lagravère, M Secanell, PW Major, JP Carey
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and …, 2011
Gas Transport in Microcapillaries, Nanocapillaries, and Porous Media
A Malekpourkoupaei, MK Sushanta, M Secanell
Microfluidics and Nanofluidics Handbook: Chemistry, Physics, and Life …, 2011
Cost optimization of a hybrid composite flywheel rotor with a split-type hub using combined analytical/numerical models
M Krack, M Secanell, P Mertiny
Structural and Multidisciplinary Optimization 44 (1), 57-73, 2011
Cited by 25Optimization analysis for plane orientation in 3-dimensional cephalometric analysis of serial cone-beam computerized tomography images
MO Lagravère, M Secanell, PW Major, JP Carey
Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and …, 2011
Cited by 29Computational design and optimization of fuel cells and fuel cell systems: a review
M Secanell, J Wishart, P Dobson
Journal of Power Sources 196 (8), 3690-3704, 2011
Cited by 184Advanced optimization strategies for cost-sensitive design of energy storage flywheel rotors
M Krack, M Secanell, P Mertiny
J. Adv. Mater 43 (2), 65-78, 2011
Cited by 15The Effect of Ionomer Thin Films in Ionomer-and Water-Filled Agglomerate Models
P Dobson, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2011
Rotor Design for High-Speed Flywheel Energy Storage Systems
M Krack, M Secanell, P Mertiny
Energy Storage in the Emerging Era of Smart Grids, 41-68, 2011
Cited by 28Mass transport measurements in porous transport layers of a PEM fuel cell
LM Pant, SK Mitra, M Secanell
International Conference on Nanochannels, Microchannels, and Minichannels …, 2011
Cited by 72010
Multi-level adaptive simulation of transient two-phase flow in heterogeneous porous media
CC Chueh, M Secanell, W Bangerth, N Djilali
Computers & fluids 39 (9), 1585-1596, 2010
Cited by 55Cost optimization of hybrid composite flywheel rotors for energy storage
M Krack, M Secanell, P Mertiny
Structural and Multidisciplinary Optimization 41 (5), 779-795, 2010
Cited by 57Numerical Modelling of Mass Transfer Through Micro and Nano Capillaries
AM Koupaei, SK Mitra, M Secanell
International Conference on Nanochannels, Microchannels, and Minichannels …, 2010
Least-squares parameter estimation for catalyst layer agglomerate models
P Dobson, M Secanell
International Conference on Fuel Cell Science, Engineering and Technology …, 2010
Cited by 2Design of an experimental setup to study mass transport in micro-nano capillaries and porous media
LM Pant, M Secanell, SK Mitra
International Conference on Nanochannels, Microchannels, and Minichannels …, 2010
Cited by 4Hybrid vehicle nomenclature and plug-in hybrid vehicle fuel economy
J Wishart, M Secanell, Y Zhou
International Journal of Electric and Hybrid Vehicles 2 (3), 177-201, 2010
Cited by 8Optimization of a proton exchange membrane fuel cell membrane electrode assembly
M Secanell, R Songprakorp, N Djilali, A Suleman
Structural and Multidisciplinary Optimization 40 (1), 563-583, 2010
Cited by 562009
Computational modeling and optimization of proton exchange membrane fuel cells.
M Secanell Gallart
Library and Archives Canada= Bibliothèque et Archives Canada, Ottawa, 2009
Cited by 162008
Optimal design of ultralow-platinum PEMFC anode electrodes
M Secanell, K Karan, A Suleman, N Djilali
Journal of the Electrochemical Society 155 (2), B125-B134, 2008
Cited by 66Design of a Polymer Electrolyte Fuel Cell Membrane Electrode Assembly for Maximum Performance under Different Operating Conditions
M Secanell, R Songprakorp, N Djilali, A Suleman
12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 5980, 2008
Optimization of membrane electrode assemblies for PEMFC
M Secanell, N Djilali, A Suleman
49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials …, 2008
Multi-objective optimization of a polymer electrolyte fuel cell membrane electrode assembly
M Secanell, R Songprakorp, A Suleman, N Djilali
Energy & Environmental Science 1 (3), 378-388, 2008
Cited by 612007
Multi-variable optimization of PEMFC cathodes using an agglomerate model
M Secanell, K Karan, A Suleman, N Djilali
Electrochimica Acta 52 (22), 6318-6337, 2007
Cited by 269Numerical optimization of proton exchange membrane fuel cell cathodes
M Secanell, B Carnes, A Suleman, N Djilali
Electrochimica Acta 52 (7), 2668-2682, 2007
Cited by 1272006
Optimization of a PEM fuel cell system based on empirical data and a generalized electrochemical semi-empirical model
J Wishart, Z Dong, M Secanell
Journal of Power Sources 161 (2), 1041-1055, 2006
Cited by 164Design of a morphing airfoil using aerodynamic shape optimization
M Secanell, A Suleman, P Gamboa
AIAA journal 44 (7), 1550-1562, 2006
Cited by 110Gradient-based optimisation of proton exchange membrane fuel cell catalyst layers
M Secanell, A Suleman, N Djilali
5th International Conference on Engineering Computational Technology, ECT 2006, 2006
Optimization of a PEM fuel cell system for low-speed hybrid electric vehicles
JD Wishart, Z Dong, MM Secanell
International Design Engineering Technical Conferences and Computers and …, 2006
Cited by 8A PEM fuel cell cathode model for gradient-based optimization
M Secanell, B Carnes, A Suleman, N Djilali
III European Conference on Computational Mechanics: Solids, Structures and …, 2006
Cited by 3Optimization of a planar self-breathing PEM fuel cell cathode
M Secanell, N Djilali, A Suleman
11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 6917, 2006
Cited by 62005
Numerical evaluation of optimization algorithms for low-Reynolds-number aerodynamic shape optimization
M Secanell, A Suleman
AIAA journal 43 (10), 2262-2267, 2005
Cited by 39Optimization of a fuel cell system based on empirical data of a PEM fuel cell stack and the generalized electrochemical model. Paper no. IGEC-1-126
J Wishart, M Secanell, Z Dong, G Wang
Optimization of a fuel cell system based on empirical data of a PEM fuel cell stack and the generalized electrochemical model
J Wishart, M Secanell, Z Dong, G Wang
interface 1, 0.85-10, 2005
Cited by 3Design of a morphing airfoil for a light unmanned aerial vehicle using high-fidelity aerodynamics shape optimization
M Secanell, A Suleman, P Gamboa
46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials …, 2005
Cited by 382004
Development of a design tool for aerodynamic shape optimization of airfoils
MS Gallart
University of Victoria, 2004
Cited by 13Sequential optimization algorithms for aerodynamic shape optimization
M Secanell, A Suleman
10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 4631, 2004
Cited by 62002
DAEs implementation of dynamic power systems
M Secanell, F Corcoles
Harmonics and Quality of Power, 2002. 10th International Conference on, 2002
Cited by 6Other
Supplementary information for “Understanding single-phase water-management signatures in fuel-cell impedance spectra: A numerical study”
A Kosakiana, LP Urbinaa, A Heamana, M Secanella
Experimental study of mass transport in PEMFCs: Through plane permeability and molecular diffusivity in GDLs
P Mangala, LM Panta, N Carrigya, M Dumontiera, V Zingana, S Mitrab, ...
GDL+ MPL− LMPL
A Kosakiana, LP Urbinaa, A Heamana, M Secanella
Supplementary information for “Impact of liquid-water accumulation and drainage cycles on fuel-cell performance and stability”
A Kosakiana, F Weia, J Zhoua, S Junga, J Sharmanb, M Secanella
Supplementary Information for “Water Transport in Anion and Proton Exchange Membranes”
F Wei, A Kosakian, J Liua, J Krachera, R Khana, M Secanella
Mohamad Ghadban
NA Saliba, M Secanell, I Lakkis, S Najem
Rationalizing Catalyst Inks for Inkjet Printed PEMFC Electrodes based on Colloidal Interactions
S Shukla, S Bhattacharjee, M Secanell
Embedded Eulerian-Lagrangian two-phase modelling of inkjet printing.
A Jarauta, PB Ryzhakov, J Pons-Prats, M Secanell
Advances in the embedded Eulerian-PFEM modeling of multiphase flows
PB Ryzhakov, A Jarauta, E Mahrous, J Pons, M Secanell, R Valéry, ...
A transient two-phase flow model for droplets on substrates with moving contact lines
A Jarauta, E Mahrous, PB Ryzhakov, J Pons-Prats, M Secanell
Multi-Scale Analysis and Simulation of Water Transport in Polymer Electrolyte Fuel Cells
M Secanell, M Sabharwal, A Kosakian, J Zhou, S Jung
A SEMI-ANALYTICAL MODEL FOR DROPLET DYNAMICS ON THE GDL SURFACE OF A PEM FUEL CELL CATHODE
A Jarauta, J Pons-Prats, M Secanell, PB Ryzhakov, SR Idelsohn, E Oñate
Multiphase water transport in polymer electrolyte fuel cells: From phase change induced flow to droplet dynamics
M Secanell, M Sabharwal, J Zhou, A Jarauta, A Putz, P Ryzhakov, ...
Open-source Fuel Cell Simulation Toolbox (OpenFCST)
M Secanell, A Putz, V Zingan, M Bhaiya, M Moore, P Dobson, P Wardlaw, ...
DRAFT: Open-source Fuel Cell Simulation Toolbox (OpenFCST)
M Secanell, A Putz, V Zingan, M Bhaiya, M Moore, P Dobson, P Wardlaw, ...